⊙ Material // Material
Stainless Steel / Stainless Steel (SUS 304)
⊙ Surface treatment // Finishing
Polishing / Mirror Polishing
⊙ Allowable weight
When mounted vertically, 45Kg/2ea
※ Note when registering AL PROFILE
In general, there is no problem in using the hinge after accurate drilling.
step. When attached to the AL profile, the groove of the AL profile is wide so you can feel the center of the hinge hole
It is installed, but when installed this way, the axis of the hinge is not aligned, so the operation is not smooth.
The shaft and main body inside the hinge are worn due to friction, leading to inoperability.
For this reason, please select and use the following products for hinges used in AL configurations.
BYHAS6060-30AC
BYHAS6065-35AC
BYHAS6070-40AC
The above products are wound around the inner shaft rim and the connection part of the main body with the acetal tube and ring.
By reducing the friction between the shaft of the hinge and the body, the operation is smooth and smooth, and no worries about generating dust.
Decrease.
English 
Vietnamese 
